DIGIPITCH 2.0 - digital pitch gauge with variable adapters for 5mm, 8mm, 10mm, 12mm and 14mm blade grips
Adjusting the rotor head was never easier than by using the new DIGIPITCH 2.0. DIGIPITCH 2.0 is inserted directly into the blade grip by means of firmly screwed adapters. This not only makes it easier and quicker to use, but also minimizes unnecessary re-clamping tolerances. All adapters are pivotably screwed to the device and therefore cannot be lost.
The variable holder itself is CNC machined from solid aluminum, offers maximum precision and holds a high-precision digital measuring unit which offers all relevant functions. The LCD display is particularly large and easy to read. It also come with a blue backlight. The Lithium battery integrated in the device can be charged directly via the enclosed USB and lasts for a long time. Even the three buttons provide direct feedback and contribute to the good feel of the device.
DIGIPITCH 2.0 fits for RC helicopters of most sizes with the following blade grips:
Blade holder 5mm
Blade holder 8mm
blade holder 10mm
Blade holder 12mm
Blade holder mount 14mm
The maximum diameter of the blade grip screw is 5mm.
The advantages at a glance
High-precision measuring unit
Resolution 0.1°
Repeat accuracy 0.1°
DIGIPITCH 2.0 can be inserted directly into the blade grip
No unnecessary reclamping tolerances
No cumbersome handling with separate plastic adapters
Simple and targeted adjustment of all rotor angle parameters
Integrated Lithium battery for long operating time
Charging via inclouded USB cable
Adapters for all blade grips sizes are permanently connected to the device
No app, stacks of paper or anything else required
Operation guide:
1. ON/OFF button is turn on/turn off. (Long press for three seconds) (HOT100019 is displayed as an absolute horizontal angle when turned on)
2. ABS/REF key, place the instrument on a horizontal platform, briefly press this key, the value will return to zero, and the LCD display(REF) will display 0.0°. The measured angle value is the relative horizontal angle value. Short press the button again, and the LCD display (ABS) will display absolute horizontal angle.
3. Hold/LSV key, short press to lock the angle/long press for three seconds to switch to slope measurement.
