Futaba CGY760R - 3-Axis Gyro with built-in FASSTest/T-FHSS Air Recieiver + GPB-1 Unit
CGY760R 3 axis heading hold gyro included receiver and head speed governor for helicopter.
Note, this version includes the GPB-1 unit (Gyro Programing Box)!
Features of CGY760R:
It is combined the receiver, the head speed governor and 3 axis heading hold gyro. So, the wiring processing is easy when it is installed.
It is successor of CGY750. Functions and setting parameters basically follow CGY750 Ver. 2.0.
Small and right weight. (size : 37.5 x 26.8 x 16.0 mm, weight : 20.2g)
It is the anodic oxidation coating on aluminum case. So the appearance is also luxurious.
There are screw holes for installing to the metal mount of helicopter at the bottom of the case.
The firmware update is available (CIU-2 or CIU-3 is necessary.)
The wireless setting of some parameters is available through trainer function of the transmitter connected with GPB-1.
760 uSec swash servo (under planning) will be available at a later date.
Gyro section:
Advanced and adaptive PID control loop which is proved by CGY750.
Corresponds to various mounting directions.
Rudder (Yaw):
Digital (1520uSec / 760uSec) and Analog (1520uSec) servo are available.
2 types of setting method, 3D and Sports.
Feed forward operation is implemented.
Aileron (Roll),Elevator (Pitch):
2 types of setting method, F3C and 3D.
Supports H3-90 / H3-120 / H3-140 / H4-00 / H4-45 swashplate types.
Digital (1520uSec / 760uSec*) and Analog (1520uSec) servo are available. (* 760uSec mode is for the future.)
Head speed governor:
Advanced and adaptive PID control loop which is proved by CGY750.
Capable of governing head speeds from 700 RPM to 4000 RPM.
Digital (1520uSec) and Analog (1520uSec) servo are available.
Governor or Revolution limiter mode selectable.
Cutting edge control algorithm provides more consistent RPM governing.
Revolution sensor is Compatible with the GV-1 and CGY750. The CGY760R also supports an optional back plate revolution sensor.
RPM data can be send to the transmitter. (Telemetry function)
Receiver section:
FASSTest (18CH mode / 12CH mode) and T-FHSS Air is available. (It is selectable on the GPB-1 unit)
Antenna diversity. (2 antennas are installed.)
Telemetry functions. (Battery voltage, S.BUS sensor connected to S.BUS2 port and RPM data)
ID-LINK method is same manner to other FASSTest or T-FHSS Air receivers.
GPB-1:
Gyro Programing box for CGY760R
Features of GPB-1:
It is the program box for CGY760R. It is connected to the dedicated port on CGY760R.
128 x 64 dots monochrome graphic LCD with backlit (same as T12K, T10J and T6K)
4 edit push keys and beeper
The power is provided from CGY760R
After turning on, it take the setting parameters from the connected CGY760R and it memories them to nonvolatile memory.
The wireless setting of some parameters is available through trainer function of the transmitter connected to GPB-1 by the dedicated cable.